您好,欢迎访问联智博库

上传文档

当前位置:首页 > 工控技术 > 变频驱动 > 台安(TAIAN)变频器N2 English manual

台安(TAIAN)变频器N2 English manual

  • 小库
  • 27 人阅读
  • 0 人下载
  • 2019-06-05 01:10:03

还剩... 页未读,继续阅读

免费阅读已结束,点击付费阅读剩下 ...

¥ 0 元,已有27人购买

免费阅读

阅读已结束,您可以下载文档离线阅读

¥ 1 元,已有0人下载

付费下载

文档部分内容文本提取

Adjustable Frequency A.C. Motor Drive N2 Series TAIAN N2-220V N2-440V 0.4~22KW ( 1.2~33.2KVA ) 0.75~22KW ( 1.7~36.6KVA ) Operations Manual Table of Contents Foreword.................................................................................................. 1 Precautions for Operation ........................................................................ 2 Operational Environment ......................................................................... 6 General Introduction ................................................................................ 7 Specifications........................................................................................... 9 Wiring Rules........................................................................................... 11 Keypad Operations ................................................................................ 21 Parameter List........................................................................................ 22 Functional Description ........................................................................... 30 Failure Codes......................................................................................... 60 Maintenance Section ............................................................................. 65 Filters ..................................................................................................... 66 Dimensions ............................................................................................ 70 Breaker Resisters & Reactors................................................................ 74 Trouble Shooting.................................................................................... 78 1 Foreword To fully employ all functions of this Taian T-verter, and to ensure the safety for its users, please read through this operations manual in detail. Should you have any further questions, please feel free to contact your local distributor or regional representative. PLEASE READ AND UNDERSTAND THIS MANUAL BEFORE OPERATING THIS T-VERTER The T-verter is a power electronic device. For safety reasons, please read carefully those paragraphs with “WARNING” or “CAUTION” symbols. They are important safety precautions to be aware of while transporting, installation, operating or examining the T-verter. Please follow these precautions to ensure your safety. WARNING Personnel injury may be resulted by improper operation. CAUTION The T-verter or mechanical system may be damaged by improper operation. WARNING � Do not touch the PCB or components on the PCB right after turning off the power before the charging indicator went off. � Do not attempt to wire circuitry while power is on. Do not attempt to examine the components and signals on the PCB while T-verter operating. � Do not attempt to disassemble or modify internal circuitry, wiring, or components of the T-verter. � The grounding terminal of the T-verter must be grounded properly (200V class:Ground to 100Ω or less, 400V class: Ground to 10Ω or less). � This is a product of the restricted sales distribution class according to EN61800-3. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. CAUTION � Do not attempt to perform dielectric strength test to internal components of the T-verter. There are sensitive semiconductor-devices vulnerable to high voltage in the T-verter. � Do not connect the output terminals: T1 (U), T2 (V), and T3 (W) to AC power input � The CMOS IC on the primary PCB of the T-verter is vulnerable to static electrical charges. Do not contact the primary PCB of the T-verter. 2 Precautions for operation Examination before installation Every T-verter has been fully tested and examined before shipment. Please carry out the following examination procedures after unpacking your T-verter. � Check to see if the model number of the T-verter matches the model number of the T-verter that you ordered. � Check to see whether any damage occurred to the T-verter during shipment. Do not connect the T-verter to the power supply if there is any sign of damage. Before turning ON power CAUTION Choose the appropriate power source with correct voltage settings for the input voltage specification of the T-verter. WARNING Special care must be taken while wiring the primary circuitry terminals. The (L1) (L2) and (L3) terminals must be connected to the input power source and must not be mistakenly connected to (T1) (T2) or (T3) output terminals. This may damage the T-verter when the power is turned on. CAUTION � Do not attempt to transport the T-verter by the front of the cover. Securely hold the T-verter by the heat-sink mounting chassis to prevent the T-verter from falling, this may cause personnel injury or damage to the T-verter itself. � Install the T-verter onto a firm metal base plate or another non-flammable type material. Do not install the T-verter onto or nearby any flammable material. � An additional cooling fan may need to be installed if several T-verters are installed into one control panel. The inside temperature inside an enclosed panel should be below 40 degrees to avoid overheating. � Turn off the power supply before proceeding to remove or perform any work on any panel. Carry out installation procedures according to instructions given in order to avoid a situation resulting in an operational malfunction. � This product is not provided with over speed protection. � Only intended for use in a pollution degree 2 macro environment or equivalent 3 When power is applied WARNING Do not attempt to install or remove input or out put connectors of T-verter when the power supply is turned on. Otherwise, the T-verter may be damaged due to the surge peak caused by the insertion or removal. Under Operation WARNING � Do not use a separate device to switch ON or OFF motor during operation. Otherwise, the T-verter may experience an over-current breakdown. � When momentary power loss is longer than 2 seconds (the large of horse power, the longer of time), the inverter does not have enough storage power to control the circuit; Therefore, when power is regenerated, the operation of the inverter is based on the setup of Fn_10/16 and the condition of external switch, this is considered to be「restart」in the following paragraphs. � When the momentary power loss is short, the inverter still has enough storage power to control the circuit; therefore, when power is regenerated, the inverter will automatically start operation again depends on the setup of Fn_31/32. � When restart the inverter, the operation of the inverter is based on the setup of Fn_10 and the condition of external switch (FWD/REV button). Attention: the restart operation is irrelevant with Fn_31/32/34/35. 1. When Fn_10=0, the inverter will not start after restart. 2. When Fn_10=1 and the external switch (FWD/REV button) is OFF, the inverter will not start after restart. 3. When Fn_10=1, the external switch (FWD/REV button) is ON, and Fn16=XXX0, the inverter will start automatically after restart. Attention: Base on safety reason, please turn off the external switch (FWD/REV button) after power loss to avoid possible damage to the machine and the human body after sudden regeneration of power. WARNING � Do not remove the front cover of the T-verter when the power is ON to avoid personnel injury caused by electrical shock. � When the automatic restart function is enabled, the motor and machinery will be restarted automatically.

小库

516篇文档

文档介绍: 台安(TAIAN)变频器N2 English manual

评论

发表评论
< /83 > 付费下载 ¥ 1 元

Powered by DS文库

Copyright © 联智博库 All Rights Reserved. 鲁ICP备18004091号-4
×
保存成功