您好,欢迎访问联智博库

上传文档

当前位置:首页 > 工控技术 > PLC > 22-COMM-B BACnet MSTP Adapter Firmware v1.002

22-COMM-B BACnet MSTP Adapter Firmware v1.002

  • 文哥
  • 8 人阅读
  • 0 人下载
  • 2019-02-22 23:25:08

还剩... 页未读,继续阅读

免费阅读已结束,点击付费阅读剩下 ...

¥ 0 元,已有8人购买

免费阅读

阅读已结束,您可以下载文档离线阅读

¥ 1 元,已有0人下载

付费下载

文档部分内容文本提取

 Release Note22-COMM-B BACnet MS/TP AdapterFirmware v1.002This release note describes major revision 1, minor revision 2 of firmware for 22-COMM-B BACnet MS/TP adapters.IntroductionThe following information is included in this document: EnhancementsThere are no enhancements provided in this revision of firmware.Corrected AnomaliesThis section describes the anomaly corrected in this revision of firmware:•Fixed the handling of “Who Has” request messages so that requests containing an object name longer than 64 bytes do not cause the adapter to temporarily fall out of the MS/TP token ring.For information about:See page:Enhancements1Corrected Anomalies1Determining Firmware Revision2Firmware Flashing4Restrictions6Compatible Revisions6Rockwell Automation Support7Product Satisfaction Return7222-COMM-B BACnet MS/TP Adapter Firmware v1.002 Determining Firmware RevisionThis section describes procedures to determine the firmware revision of your 22-COMM-B BACnet MS/TP adapter.Using the External LCD HIM (22-HIM-**) StepKey(s)Example Screens1.Power up the drive. The Parameters menu for the drive will be displayed.2.Press Sel key until the Device Select menu is displayed, and then press Enter.3.Press Down Arrow to scroll to the 22-COMM-B adapter, and then press Enter.4.Press Sel key until the Diagnostics menu is displayed. Press Down Arrow to scroll to Device Version, and then press Enter.5.The present firmware version of the converter is shown on the Firmware line.ParametersGroupsLinear ListChanged ParamsDIAGPARAMDSELMEMSEL �SelandDevice SelectDSI DevicesDIAGPARAMDSELMEMSEL �andDSI DevicesPowerFlex 4022-COMM-BandSelDiagnosticsEventsDevice VersionDevice ItemsDIAGPARAMDSELMEMSEL �Device Version22-COMM-BAdapterSeries: AFirmware: 1.00122-COMM-B BACnet MS/TP Adapter Firmware v1.0023 Using DriveExplorer Lite/Full1.Launch DriveExplorer and go online (via 22-SCM-232 or 1203-USB converter) with the drive that is connected to the adapter.2.In the DriveExplorer treeview, click on 22-COMM-B BACnet adapter as shown in Figure 1.3.Click the information icon to display the adapter’s properties screen.4.The “Revision:” field shows the present revision (for example, 1.001) of the adapter firmware. Figure 1 Information Icon in DriveExplorer Window TIP: When clicking on the 22-COMM-B adapter using version 5.01 or higher DriveExplorer Lite/Full, the adapter firmware revision is also shown in the right pane of the DriveExplorer window.Step 2Step 3Step 4422-COMM-B BACnet MS/TP Adapter Firmware v1.002 Using DriveExecutive1.Launch DriveExecutive and go online with the drive that is connected to the adapter.2.In the DriveExecutive treeview, click on 22-COMM-B as shown in Figure 2.3.Click the information icon to display the adapter’s Properties screen.4.The “Revision:” field shows the present revision (for example, 1.001) of the adapter firmware.Figure 2 Information Icon in DriveExecutive Window Firmware FlashingThis section describes procedures to flash upgrade your adapter firmware. Flash kits for drives, communications adapters, and peripherals are provided on the Allen-Bradley Web Updates site located at http://www.ab.com/support/abdrives/webupdate. Step 3Step 2Step 4!ATTENTION: Risk of permanent equipment damage exists. Once a flash update has been started, do not remove power from the drive until after the download has completed and the MOD status indicator on the adapter becomes FLASHING GREEN. If power is removed before this occurs, the adapter may be permanently damaged. An adapter that has been damaged in this way cannot be repaired.22-COMM-B BACnet MS/TP Adapter Firmware v1.0025 Installing the Flash Kit1.Install the flash kit utility from the Allen-Bradley Web Updates site for the 22-COMM-B adapter. (This also automatically installs the latest version of the ControlFLASH utility on your computer.)2.You are now ready to use DriveExplorer, DriveExecutive or ControlFLASH to update the adapter. Follow the instructions in the appropriate section below.Using DriveExplorer Lite/Full1.With the Flash Kit installed (see Installing the Flash Kit), launch DriveExplorer and go online (via 22-SCM-232 or 1203-USB converter) with the drive that is connected to the adapter.2.In the DriveExplorer treeview, click on 22-COMM-B BACnet adapter. Then click the information icon as shown in Figure 1 to display the adapter’s properties screen.3.On the 22-COMM-B properties screen, click the Details tab.Important:This update may cause the adapter parameters to revert to their default values. You may want to save your configuration using DriveExplorer or the HIM CopyCat feature before upgrading.4.To start the flash update, click the Flash Update… button. Follow the screen prompts until the flash update procedure completes and displays the new firmware revision (v1.002).Using DriveExecutive1.With the Flash Kit installed (see Installing the Flash Kit), launch DriveExecutive and go online with the drive that is connected to the adapter.2.In the DriveExecutive treeview, click on 22-COMM-B. Then click the information icon as shown in Figure 2 to display the adapter’s Properties screen.3.On the 22-COMM-B Properties screen, click the Component Details tab.Important:This update may cause the adapter parameters to revert to their default values. You may want to save your configuration using DriveExecutive or the HIM CopyCat feature before upgrading.4.To start the flash update, click the Flash Update button. Follow the screen prompts until the flash update procedure completes and displays the new firmware revision (v1.002).

文哥
文哥
  • 4231

    文档
  • 0

    金币
Ta的主页 发私信

4231篇文档

文档介绍: 22-COMM-B BACnet MSTP Adapter Firmware v1.002

评论

发表评论
< /8 > 付费下载 ¥ 1 元

Powered by DS文库

Copyright © 联智博库 All Rights Reserved. 鲁ICP备18004091号-4
×
保存成功