您好,欢迎访问联智博库

上传文档

当前位置:首页 > 工控技术 > HMI > Allen-Bradley ControlNet Communications for PanelView Terminals User Guide 2711-610

Allen-Bradley ControlNet Communications for PanelView Terminals User Guide 2711-610

  • 文哥
  • 39 人阅读
  • 0 人下载
  • 2019-02-22 17:34:48

还剩... 页未读,继续阅读

免费阅读已结束,点击付费阅读剩下 ...

¥ 0 元,已有39人购买

免费阅读

阅读已结束,您可以下载文档离线阅读

¥ 1 元,已有0人下载

付费下载

文档部分内容文本提取

Publication 2711-6.10 ���������������������������������������������This document describes how to connect and configurecommunications for the ControlNet versions of the PanelViewterminals. This document provides supplemental information forthe PanelBuilder Software User Manual (Publication 2711-6.0) andPanelView Operator Terminals User Manual (Publication 2711-6.1).For information about:Go to page:Related Publications2Before You Use this Guide2ControlNet Protocol3Compatible ControlNet Controllers3ControlNet PanelView Terminals3Typical ControlNet Network4Making ControlNet Connections5NAP Connector Pinout Definitions5NAP and Redundant Cables5Modifying ControlNet Settings from the Terminal6Displaying ControlNet Internal Tag Data8Setting Up Communications using PanelBuilderSelecting a ControlNet Terminal9Configuring ControlNet Communications10Supported Data and Address Types11Tag Addressing11File Conversions12Downloading Applications12ControlNet Application Report14PanelBuilder Error Messages14Channel Status Field15Error Messages and Codes16Terminal Alert Codes17Terminal Communication Status and Alert Messages17Internal Errors18Glossary19User GuideIntroduction ControlNet Communications2Publication 2711-6.10The following documentation provides additional information aboutinstalling, configuring and using your PanelView terminals:Publication TitlePublication No.PanelBuilder Software User Manual2711-6.0PanelView Operator Terminals User Manual2711-6.1PanelBuilder Software Getting Started2711-6.2For more information on ControlNet related products, refer to:Publication TitlePublication No.ControlNet System Overview1786-2.9ControlNet Cable System Planning and Installation Manual1786-6.2.1ControlNet Cable System Component ListAG-2.2Note: The Allen-Bradley website (www.ab.com) providesinformation and product descriptions of ControlNet products. Underthe Products and Services heading, select Communications.You should be familiar with ControlNet communications. If you want to learn more about ControlNet, refer to the relatedpublications list above.Note: Refer to the glossary at the back of this document fordefinitions of terms you are not familiar with.Related PublicationsBefore You Use this Guide ControlNet Communications3Publication 2711-6.10The PanelView terminal supports release 1.5 of ControlNet.Unscheduled (peer) addressing of tags is supported. Scheduled (I/O)addressing is not supported.ControlNet allows a flexible control architecture that can work withmultiple processors and up to 99 nodes (via taps) anywhere along thetrunk cable of the network. There is no minimum tap separation andyou can access the ControlNet network from every node (includingadapters).The ControlNet PanelView supports unscheduled PCCC(Programmable Controller Communication Command) messagingwith the following controllers:•PLC-5/20C•PLC-5/40C•PLC-5/60C•PLC-5/80CControlNet terminals have a 15 on the end of the catalog number, forexample 2711-T9A15.The ControlNet terminals have:•ControlNet communication port•RS-232 printer/file transfer portIn addition, each terminal is available with either AC or DC powerinput. The characters L1 at the end of the catalog number designatea terminal with DC power input (e.g. 2711-T9A15L1).ControlNet ProtocolCompatible ControlNetControllersControlNet PanelViewTerminals ControlNet Communications4Publication 2711-6.10Shown below is a typical ControlNet network with a PanelView 900installed on a network drop.PanelView 900Serial LinkRS-232 PortComputer for developing PanelView applications2711-T9A15 ShownControlNet PortBNC Coaxial CableorPrinterSerial LinkPersonalComputerPersonalComputer1770-KFCPLC-5/20CPLC-5/40CPLC-5/80CRepeater(1786-RPT)Flex I/O(1794-ACN)1786-RG6 Cable1784-KTC(X)Interface Card1784-KTC(X) Card toControlNet (RSLinx) & Win PFT = Taps= TerminatorsImportant: Do not connect to a network using both the redundantcable BNC connector and the Network Access Port (NAP).Typical ControlNetNetwork ControlNet Communications5Publication 2711-6.10Refer to the following pinout information to connect the PanelViewto a ControlNet network.Important: Follow the ControlNet network layout and design asspecified in the ControlNet Cable System Planning and InstallationManual (Publication 1786-6.2.1).PanelView 900 ShownPin 1NAP ConnectorRedundant BNC Cable ConnectorsChannel AChannel BPin #NAP Signal1Signal Common2No Connection3TX_H4TX_L5RX_L6RX_H7No Connection8Signal CommonShellEarth GroundControlNet cables, taps, connectors, terminators and repeaters areavailable. Refer to the ControlNet Cable System Planning andInstallation manual (Publication 1786-6.2.1) for descriptions ofthese components. For information on purchasing these items, referto the Allen-Bradley ControlNet Cable System Component List(Publication AG-2.2).ItemCatalog No.RG-6 quad-shield cable1786-RG6Coax repeater1786-RPT, -RPTDCoax taps1786-TPR, -TPS, -TPYR, -TPYSNetwork access cable1786-CPCoax toolkit1786-CTKSegment terminators1786-XTBNC connectors1786-BNC, -BNCJ, -BNCP, -BNCJ1Making ControlNetConnectionsNAP Connector PinoutDefinitionsNAP and RedundantCables

文哥
文哥
  • 4231

    文档
  • 0

    金币
Ta的主页 发私信

4231篇文档

文档介绍: Allen-Bradley ControlNet Communications for PanelView Terminals User Guide 2711-610

评论

发表评论
< /21 > 付费下载 ¥ 1 元

Powered by DS文库

Copyright © 联智博库 All Rights Reserved. 鲁ICP备18004091号-4
×
保存成功