您好,欢迎访问联智博库

上传文档

当前位置:首页 > 工控技术 > HMI > Seiko Epson Corporation Remote Ethernet

Seiko Epson Corporation Remote Ethernet

  • 文哥
  • 6 人阅读
  • 0 人下载
  • 2019-02-20 11:28:19

还剩... 页未读,继续阅读

免费阅读已结束,点击付费阅读剩下 ...

¥ 0 元,已有6人购买

免费阅读

阅读已结束,您可以下载文档离线阅读

¥ 1 元,已有0人下载

付费下载

文档部分内容文本提取

1Seiko Epson Corporation Remote Ethernet Driver1System Configuration.......................................................................................................32Selection of External Device............................................................................................43Example of Communication Setting.................................................................................54Setup Items......................................................................................................................75Supported Device...........................................................................................................116Device Code and Address Code....................................................................................337Error Messages..............................................................................................................36Remote Ethernet Driver GP-Pro EX Device/PLC Connection Manual2IntroductionThis manual describes how to connect the Display and the External Device (target Controller).In this manual, the connection procedure will be described by following the below sections:1System ConfigurationThis section shows the types of External Devices which can be connected and SIO type."1 System Configuration" (page 3)2Selection of External DeviceSelect a model (series) of the External Device to be connected and connection method. "2 Selection of External Device" (page 4)3Example of Communication SettingsThis section shows setting examples for communicating between the Display and the External Device. "3 Example of Communication Setting" (page 5)4Setup ItemsThis section describes communication setup items on the Display.Set communication settings of the Display with GP-Pro EX or in offline mode."4 Setup Items" (page 7)OperationRemote Ethernet Driver GP-Pro EX Device/PLC Connection Manual31System ConfigurationThe system configuration in the case when the External Device of Seiko Epson Corporation and the Display are connected is shown.Connection Configuration•1:1 Connection•1:n Connection*1When 17 or more External Devices are connected, it is necessary to check [Increase allowable number of Devices/PLCs]."4.1 Setup Items in GP-Pro EX" (page 7)SeriesCPULink I/FInterfaceSetting ExampleRC700RC700LAN(Ethernet Communication) PortEthernet (TCP)Setting Example 1 (page 5)•Firmware version 7.0.6.1 or later is required to use the RC700.Remote Ethernet Driver GP-Pro EX Device/PLC Connection Manual42Selection of External DeviceSelect the External Device to be connected to the Display.Setup ItemsSetup DescriptionNumber of Devices/PLCsEnter an integer from 1 to 4 to define the number of Devices/PLCs to connect to the display.ManufacturerSelect the manufacturer of the External Device to connect. Select "Seiko Epson Corporation".SeriesSelect the External Device model (series) and the connection method. Select "Remote Ethernet".In System configuration, make sure the External Device you are connecting is supported by "Remote Ethernet"."1 System Configuration" (page 3)PortSelect the Display port to connect to the External Device. Select "Ethernet(TCP)".Use System AreaNot available in this driver.Remote Ethernet Driver GP-Pro EX Device/PLC Connection Manual53Example of Communication SettingExamples of communication settings of the Display and the External Device, recommended by Pro-face, are shown.3.1Setting Example 1Settings of GP-Pro EX Communication SettingsTo display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC].Device SettingTo display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC] window, select the external device and click [Settings] .To connect multiple External Devices, from [Device-Specific Settings] in the [Device/PLC] window, click [Add Device] to add another External Device.Notes•Check with a network administrator about IP address. Do not set the duplicate IP address.•Set IP address on the External Device for IP address in Device-specific settings.•You need to set IP address on the display in the offline mode of the display.

文哥
文哥
  • 4231

    文档
  • 0

    金币
Ta的主页 发私信

4231篇文档

文档介绍: Seiko Epson Corporation Remote Ethernet

评论

发表评论
< /36 > 付费下载 ¥ 1 元

Powered by DS文库

Copyright © 联智博库 All Rights Reserved. 鲁ICP备18004091号-4
×
保存成功