您好,欢迎访问联智博库

上传文档

当前位置:首页 > 工控技术 > PLC > CompactLogix 5370 L1 Controllers Quick Start

CompactLogix 5370 L1 Controllers Quick Start

  • 小库
  • 12 人阅读
  • 0 人下载
  • 2019-02-20 11:06:54

还剩... 页未读,继续阅读

免费阅读已结束,点击付费阅读剩下 ...

¥ 0 元,已有12人购买

免费阅读

阅读已结束,您可以下载文档离线阅读

¥ 1 元,已有0人下载

付费下载

文档部分内容文本提取

CompactLogix 5370 L1 ControllersCatalog Numbers 1769-L16ER-BB1B, 1769-L18ER-BB1B, 1769-L18ERM-BB1BQuick StartImportant User InformationSolid-state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://www.rockwellautomation.com/literature/) describes some important differences between solid-state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the wide variety of uses for solid-state equipment, all persons responsible for applying this equipment must satisfy themselves that each intended application of this equipment is acceptable.In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment.The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams.No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual.Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited.Throughout this manual, when necessary, we use notes to make you aware of safety considerations.Allen-Bradley, CompactLogix, ControlFLASH, FactoryTalk, FLEX, Integrated Architecture, Kinetix, Logix5000, PanelView, POINT I/O, PowerFlex, Rockwell Software, Rockwell Automation, RSLinx, RSLogix, Stratix 6000, and TechConnect are trademarks of Rockwell Automation, Inc.Trademarks not belonging to Rockwell Automation are property of their respective companies.WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous environment, which may lead to personal injury or death, property damage, or economic loss.ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous voltage may be present.BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may reach dangerous temperatures.IMPORTANTIdentifies information that is critical for successful application and understanding of the product.Rockwell Automation Publication IASIMP-QS024A-EN-P - February 20123Where to StartFollow the path that matches your hardware and network configuration.0201734-AENTRModuleStatusNetworkActivityNetworkStatusPoint BusStatusSystemPowerFieldPowerPOINT I OLink 1 Activity/StatusLink 2 Activity/StatusIP ADDRESSPORTMODNET BNET ASTS00:00:BC:2E:69:F6Create an RSLogix 5000 ProjectPrepare the CompactLogix 5370 L1 Controller HardwarePrepare the Computer and Load Controller FirmwareConfigure the EtherNet/IP NetworkRequiredRequiredOptionalRequiredpage15page29page45page51OptionalPOINT I/O ModulesKinetix 350 DrivePowerFlex 40 DrivePowerFlex 70 DrivePanelView Plus TerminalFor more information on using each optional device, see Table1 on page11.00:00:BC:2E:69:F64Rockwell Automation Publication IASIMP-QS024A-EN-P - February 2012Where to StartHow Hardware is ConnectedThis quick start, in use with the additional quick starts listed in Table1 on page11, describes a CompactLogix 5370 L1 control system as shown in Figure1. Figure 1 - CompactLogix 5370 L1 Controller in a Star Network TopologyPORTMODNET BNET ASTS12345678Kinetix 350 DriveStratix 6000SwitchCompactLogix 5370L1 Control SystemPowerFlex 70 Drive with 20-COMM-E AdapterPowerFlex 40 Drive with 22-COMM-E AdapterPanelView Plus Terminal with Built-in EtherNet/IP PortComputerDistributed POINT I/O Modules with 1734-AENT AdapterStar Network TopologySystem Configuration in RSLogix 5000 SoftwareRockwell Automation Publication IASIMP-QS024A-EN-P - February 20125Where to StartSample Panel LayoutThe sample panel layout shows the orientation of an example CompactLogix 5370 L1 control system using an EtherNet/IP network. IMPORTANTThe graphic below is an example panel layout. The specific layout of CompactLogix 5370 L1 control systems varies byapplication.PORTMODNET BNET ASTSAC Line FilterPowerFlex 70 DriveKinetix 350 DriveLine Interface ModuleCompactLogix 5370 L1 Control SystemEthernet SwitchDistributed POINT I/O ModulesThrough-the-door DisconnectPanelView Plus TerminalE-stop Push ButtonPowerFlex 40 Drive

小库

92篇文档

文档介绍: CompactLogix 5370 L1 Controllers Quick Start

评论

发表评论
< /72 > 付费下载 ¥ 1 元

Powered by DS文库

Copyright © 联智博库 All Rights Reserved. 鲁ICP备18004091号-4
×
保存成功